{"id":188,"date":"2020-12-08T09:46:47","date_gmt":"2020-12-08T09:46:47","guid":{"rendered":"https:\/\/cohesivehomes.com\/?p=188"},"modified":"2020-12-29T16:16:57","modified_gmt":"2020-12-29T16:16:57","slug":"insulating-a-junction-box","status":"publish","type":"post","link":"https:\/\/cohesivehomes.com\/insulating-a-junction-box","title":{"rendered":"Can a Junction Box Be Covered by Insulation?"},"content":{"rendered":"\n

Electrical boxes are not just ugly to look at, they also pose a threat to those around; especially children. Covering these boxes is permissible in the National Electrical Code with wooden boxes, so long as they are accessible; i.e., the box can be opened. However, NEC only talks about this if the box is located outside your house.<\/p>\n\n\n\n

What if the box is located in your attic or the basement? Old houses have these boxes in the basement, while some designs call for the same to be in the attic. What then? Can a junction box be covered by insulation?<\/p>\n\n\n\n

The answer to this isn\u2019t present in the NEC, but other code check books that state that conduit or other insulation enclosures can be installed in a way that the electrical box is accessible without having to remove any part of the structure<\/em><\/strong><\/em>, or excavate any ground around it. However, that\u2019s not all. In this article, we will dive into the numerous intricacies of covering a junction box by insulation. <\/strong><\/p>\n\n\n\n\n\n

Can <\/strong>a<\/strong> Junction Box Be Covered By Insulation; The Code<\/strong><\/strong><\/h2>\n\n\n\n

All NEC says about covering junction boxes is that it should be accessible. If we want to answer the question on whether we can cover it with insulation or not, let us first consider Article 314.29<\/u><\/a> of NEC (2014):<\/p>\n\n\n\n

\n

314.29 Boxes, Conduit Bodies, and Handhole Enclosures Need to Be Accessible. <\/em><\/strong><\/em><\/strong>Any<\/em> <\/em><\/strong><\/em><\/strong>box, conduit, or handhole enclosures installed on top of junction boxes or have wiring contained within must be accessible without removing any part of the building or structure, without handling any underground circuits, or without excavating sidewalks, paving, earth, or other substance that established the finished grade.<\/em><\/p>\nArticle 314.29, NEC 2014.<\/cite><\/blockquote>\n\n\n\n

To translate the excerpt above, this suggests that no matter what you install, it needs to be accessible without you having to remove any part of the building or your house\u2019s structure, dig around it or mess with any underground circuits to reach it.<\/strong><\/p>\n\n\n\n

But what about insulation? Does it fall under the category of your house\u2019s (or building\u2019s) structure? For that, let\u2019s consider what the Electrical Inspections of Existing Dwellings<\/u><\/a> suggests. The book we mentioned is what home inspectors use when they need reference material. According to this book: <\/p>\n\n\n\n

\n

“Junction boxes can be covered by insulation in such a manner that it can be removed without damaging it to access the box. Foamed-in-place insulation isn\u2019t removable and therefore not permissible.”<\/em><\/p>\nElectrical Inspections Of Existing Dwellings<\/cite><\/blockquote>\n\n\n\n

This shows that if you\u2019re going to cover a junction box with insulation, make sure it remains accessible<\/strong>.<\/p>\n\n\n\n

Accessible; What Does It Mean? <\/strong><\/h2>\n\n\n
\n
\"Can
A junction box with various wiring being terminated inside.<\/figcaption><\/figure><\/div>\n\n\n

The codes mentioned above, both suggest that the junction box must be accessible if you\u2019re going to cover it by insulation. But what does accessible <\/em>mean? According to the NEC, accessible means:<\/p>\n\n\n\n

\n

“Accessible in terms of insulation around junction boxes mean anything that can be removed, unwound, or exposed without having to damage the building, structure, or the finish around the object. Furthermore, the box must not be permanently enclosed directly or indirectly due to the insulation.”<\/em><\/p>\nNEC<\/cite><\/blockquote>\n\n\n\n

This suggests that you must be able to remove the insulation around the junction box without damaging the insulation itself or the junction box, for that matter. This is the reason foamed-in-place insulation isn\u2019t allowed near junction boxes. These insulations harden up and in order for electricians (or you) to reach the junction box, you will have to break or tear the insulation up.<\/p>\n\n\n\n

In our personal opinion<\/strong> we would suggest that before you cover the junction box with insulation, you should considering installing access panels in the ceiling<\/a> that open directly to these concealed boxes. You can cover those access panels with insulation, thus remain on the safe side. Just remember to mark the box\u2019s location.<\/p>\n\n\n\n

Not covering junction boxes at all isn\u2019t recommended, either<\/strong>, so if you\u2019re going to do it, why not take a route that is safer for you, inspection- and otherwise?<\/p>\n\n\n\n

What If I Don\u2019t Cover a Junction Box by Insulation?<\/strong><\/h2>\n\n\n\n

The lack of insulation around your junction box can lead to several problems; particularly rust on the contacts<\/strong>. This is because your junction box is then exposed to the elements such as cold air and moisture; even if it\u2019s in the attic.<\/p>\n\n\n\n

Your junction box is going to run hot and therefore warm the air around it. When the cold attic air comes into contact with the warm air, it will lead to condensation on your junction box and thus introduce moisture into the system. Best case scenario; you will need to replace the contacts or do maintenance work on them more often. Worst case; fire. <\/em> <\/p>\n\n\n\n

Best Insulation <\/strong>t<\/strong>o Cover Junction Box<\/strong><\/strong><\/h2>\n\n\n\n

A simple Google search on the internet will show that foamed-in-place insulation is quick and easy to install, but as we mentioned above, it isn\u2019t permissible since the box isn\u2019t accessible anymore. So, which insulation to use?<\/p>\n\n\n\n

The best insulation to use around your junction box, in our opinion, is the fiberglass insulation:<\/p>\n\n\n

\n
\"Insulation
Insulation under a wall.<\/figcaption><\/figure><\/div>\n\n\n

There is no ambiguity with regards to this insulation, either; it\u2019s allowed. This insulation inhibits air exchange and therefore doesn\u2019t introduce moisture inside; thus protecting the junction box.<\/p>\n\n\n\n

Furthermore, it is fire resistant and is known to smother fires because of its glass content. We recommend avoiding fiberglass insulation that has batts backed with paper or foil. Batts made out of paper or foil can burn easily.<\/p>\n\n\n\n

Summing up, you can cover a junction box by insulation, so long as you do it in such a manner that it is accessible. Here, accessible means that you can read the contacts and do regular maintenance or repair without having to tear the insulation or anything else around the box.<\/p>\n\n\n\n

FAQS<\/h2>\n\n\n\n

Q: Do I need a box cover for my junction box?<\/h3>\n\n\n\n

A: Yes, it is required to have a box cover for your junction box. Box covers are used to protect the electrical connections inside the junction box. They also provide a barrier between the wiring and any surrounding materials, reducing the risk of accidental contact or damage. Make sure to use a suitable box cover that meets the electrical code requirements for your specific installation.<\/p>\n\n\n\n

Q: Can I insulate around electrical conduit and conduit bodies?<\/h3>\n\n\n\n

A: Yes, you can insulate around electrical conduit and conduit bodies. However, it is important to make sure that the insulation does not interfere with the accessibility of the conduit or conduit bodies. The insulation should be installed in a way that allows easy access to the electrical wiring if necessary.<\/p>\n\n\n\n

Q: Can I insulate around a light fixture in the attic?<\/h3>\n\n\n\n

A: Insulating around a light fixture in the attic is possible, but you need to ensure that the insulation does not come into direct contact with the fixture. The insulation should be installed in a way that allows for proper air circulation around the fixture to prevent overheating. It is recommended to consult the manufacturer’s instructions or an electrician for specific guidance on insulating around your particular light fixture.<\/p>\n\n\n\n

Q: How can I access junction boxes in the attic?<\/h3>\n\n\n\n

A: Junction boxes in the attic should be easily accessible without damaging the building structure or finish. This means that there should be a clear path or access point to reach the junction box. Access can be achieved by providing an opening in the insulation or by using removable panels or covers. It is important to plan for accessibility when installing junction boxes in the attic.<\/p>\n\n\n\n

Q: Can a junction box be completely covered by insulation?<\/h3>\n\n\n\n

A: No, a junction box should not be completely covered by insulation. The junction box should remain accessible, which means it should not be closed in or blocked by insulation. Completely covering a junction box with insulation can create potential safety hazards and make it difficult to access the electrical connections inside if needed.<\/p>\n\n\n\n

\n