{"id":1822,"date":"2023-01-30T10:58:41","date_gmt":"2023-01-30T10:58:41","guid":{"rendered":"https:\/\/cohesivehomes.com\/?p=1822"},"modified":"2023-10-09T14:26:28","modified_gmt":"2023-10-09T14:26:28","slug":"how-to-replace-knob-and-tube-wiring-with-romex","status":"publish","type":"post","link":"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex","title":{"rendered":"How To Replace Knob And Tube Wiring With Romex?"},"content":{"rendered":"\n

Knob and tube wiring was a common electrical system used in older homes before the 1950s. <\/p>\n\n\n\n

This type of wiring is no longer considered safe for use in most modern homes due to its age and lack of grounding protection. <\/p>\n\n\n\n

If your home still has knob and tube wiring, it’s important to replace it with Romex as soon as possible.<\/p>\n\n\n\n

Replacing knob and tube wiring with Romex is a relatively simple job that can be done by an experienced do-it-yourselfer or a professional electrician.<\/p>\n\n\n\n

According to the NEC, knob and tube wiring must be replaced with Romex if the insulation is damaged or worn. Before replacing the old wiring, it’s also important to check for any loose connections that could cause a shock hazard.<\/strong><\/p>\n\n\n\n

In this guide, we’ll show you how to safely remove the old knob and tube wires from your walls and install new Romex wires<\/a> in their place. With the right tools and safety precautions, replacing the knob and tube wiring won’t take long at all.<\/p>\n\n\n\n

What Is Knob And Tube Wiring?<\/h2>\n\n\n\n
\"How
How To Replace Knob And Tube Wiring With Romex?<\/figcaption><\/figure>\n\n\n\n

The first kind of wiring used in homes was knob and tube wiring.<\/strong><\/p>\n\n\n\n

There is no grounding conductor because it only uses two conductors per circuit, which is a reason to remove it in and of itself.<\/p>\n\n\n\n

It does not offer the same protection as more modern wiring systems<\/a>, and so runs a greater risk of electrical shock or fire.<\/p>\n\n\n\n

Knob and tube wiring also lacks an insulation sheath to protect against moisture, heat, or vibration<\/a> which makes it more prone to failure over time.<\/p>\n\n\n\n

Because the wires are not encased in plastic tubing, which is more common in modern wiring, the wires can rub together, creating an electrical short.<\/p>\n\n\n\n

This kind of wiring is also more difficult to update because it does not support the three-wire circuits that are necessary for many appliances and electronics.<\/p>\n\n\n\n

For all these reasons, knob and tube wiring should be considered dangerous and outdated.<\/p>\n\n\n\n

If you suspect your home may have knob and tube wiring, it is essential to contact an experienced electrician for an inspection.<\/p>\n\n\n\n

A professional can assess the condition of the wiring, identify any potential problems or hazards, and advise you on how to proceed.<\/p>\n\n\n\n

The safest option is to completely replace the knob and tube wiring with a more modern wiring system that meets building codes.<\/p>\n\n\n\n

What Is Romex Wiring?<\/h2>\n\n\n\n
\"How
Wiring with Romex<\/figcaption><\/figure>\n\n\n\n

Romex<\/a> is the current industry standard for home wiring.<\/strong><\/p>\n\n\n\n

Non-metallic, or NM cable, is the official name for it. The most recent type is NM-B. The latest standard is NM-B, so if you’re installing new wire, you’d purchase this kind.<\/p>\n\n\n\n

It’s crucial to understand that when put properly, this wire is dependable and ought to last for decades. It’s designed to be simple to install, but also safe and secure.<\/p>\n\n\n\n

Romex consists of two or three individual wires wrapped in a protective outer sheath.<\/p>\n\n\n\n

There may be one or two additional grounding wires wrapped in the same cable as well.<\/p>\n\n\n\n

Each of the individual insulated wires contains plastic insulation with different colors for easy identification.<\/p>\n\n\n\n

The most popular colors for Romex wiring include black, white, or red for hot wires, bare copper wire for the neutral wire, and green or bare copper for the ground. Depending on the application, other colors may be used as well.<\/p>\n\n\n\n

Romex is often used to wire switches and outlets in residential buildings<\/a>.<\/p>\n\n\n\n

It’s also regularly used in many commercial applications and is one of the most common types of wiring.<\/p>\n\n\n\n

Romex is popular because it’s very versatile, cost-effective, easy to install, and durable. It’s available in different gauges that are suitable for many electrical applications.<\/p>\n\n\n\n

Is Romex A Knob And Tube?<\/h3>\n\n\n\n

Unlike the oldest wiring like knob and tube or cloth wiring, Romex has a ground wire.<\/strong><\/p>\n\n\n\n

This is important for safety reasons, as the ground wire provides an additional level of protection against electric shock in case of a short circuit or other electrical issues.<\/p>\n\n\n\n

Romex wiring also contains more insulation than knob and tube or cloth wiring, providing greater protection against fire hazards. It’s important to note that traditional knob and tube wiring should not be used in any new installations, due to its lack of safety features.<\/p>\n\n\n\n

And the Outer jacket of Romex is Slippery and Flexible<\/p>\n\n\n\n

The outer jacket of Romex is made from a material called polyvinyl chloride (PVC)<\/a>.<\/p>\n\n\n\n

This material is slippery and flexible, making it easier to pull the cable through walls during installation.<\/p>\n\n\n\n

It also helps protect the wire from damage caused by abrasions or punctures.<\/p>\n\n\n\n

PVC jackets are also fire-resistant, which further adds to the safety of Romex wiring.<\/p>\n\n\n\n

Romex is the most common type of wiring used in residential and commercial buildings today, providing reliable and safe electrical connections.<\/p>\n\n\n\n

So the Answer to Is Romex a Knob and Tube? is No. Romex is not a Knob and Tube. <\/strong><\/p>\n\n\n\n

It is the current industry standard for home wiring, providing reliable and safe electrical connections.<\/strong><\/p>\n\n\n\n

Why Did People Stop Using Knob And Tubes?<\/h2>\n\n\n\n

There were several reasons why people stopped using knob and tube wiring. First of all, the wiring itself is not up to current safety standards.<\/p>\n\n\n\n

According to the <\/strong>International Association of Home Inspectors (IAHI)<\/strong><\/a>, knob and tube wiring was designed for a much lower level of electrical current than is used today. As such, it can easily overheat when exposed to higher levels of electricity, resulting in an increased risk of fires.<\/strong><\/p>\n\n\n\n

The wiring itself is not insulated and therefore susceptible to weather-related damages.<\/p>\n\n\n\n

This means that the wiring may be prone to rust and corrosion, which could lead to shorts in the system.<\/p>\n\n\n\n

The wires are also not grounded, so they are unable to offer protection from an electrical surge or lightning strike.<\/p>\n\n\n\n

In addition, knob and tube wiring is not designed to support modern electrical appliances.<\/p>\n\n\n\n

The number of outlets is limited and it can often be difficult to upgrade or modify the system.<\/p>\n\n\n\n

Finally, knob and tube wiring does not provide a good conduit<\/a> for data communication such as phone lines or cable television.<\/p>\n\n\n\n

The high cost of installation also adds to the reason why people stopped using knob and tube wiring.<\/p>\n\n\n\n

For these reasons, knob and tube wiring are no longer recommended for use in homes today.<\/p>\n\n\n\n

If you have an older home with this type of wiring, it is important to get it inspected by a qualified electrician and consider updating your system to something more modern and safe.<\/p>\n\n\n\n

What Are The Alternatives To The Knob And Tube?<\/h2>\n\n\n\n

When it comes to replacing your knob and tube wiring, there are several alternatives that you can explore.<\/p>\n\n\n\n

First, a professional electrician may suggest rewiring the entire electrical system with modern materials such as copper or aluminum conductors insulated with thermoplastic sheathing.<\/p>\n\n\n\n

This type of rewiring is often referred to as a \u201crewire\u201d<\/strong> and is generally the most expensive alternative.<\/p>\n\n\n\n

Second, if you want to keep your original wiring but make it safer, a licensed electrician can perform an electrical upgrade using <\/strong>ground fault circuit interrupters (GFCIs)<\/strong><\/a>.<\/strong> These devices detect any sudden changes in the current flow and instantly shut off the power before serious damage can occur.<\/p>\n\n\n\n

Third, if you\u2019re unable to rewire or upgrade your existing wiring, the most cost-effective option is to install an <\/strong>arc fault circuit interrupter (AFCI)<\/strong><\/a>. <\/strong>This device monitors the amount of current flowing through a circuit and shuts off power when a potentially dangerous arcing current occurs.<\/p>\n\n\n\n

No matter which option you choose, it\u2019s important to consult with a licensed electrician who can help you make the best decision for your home and family. Having an experienced professional on board will ensure that all of the necessary safety measures are taken and that your new wiring system is up to code.<\/p>\n\n\n\n

Is Romex Safer Than Knob And Tube?<\/h2>\n\n\n\n
\"How
How To Replace Knob And Tube Wiring With Romex?<\/figcaption><\/figure>\n\n\n\n

Yes. Romex is one of the better and safer alternatives for the following reasons.<\/strong><\/p>\n\n\n\n

Non-Metalic Sheathnig<\/h3>\n\n\n\n

It has a solid plastic sheathing that surrounds both the black and white insulated wires, helping to protect them from any external damage. This sheathing is heat-resistant and flame resistant. Able to withstand 90 degrees Fahrenheit.<\/p>\n\n\n\n

AFCI\/GFCI Protection<\/h3>\n\n\n\n

Romex can be protected with arc fault circuit interrupters <\/a>(AFCIs) and ground fault circuit interrupters (GFCIs)<\/a>. These devices can detect any sudden changes in current flow and will shut off the power before serious damage occurs. This gives you added assurance that your wiring is protected against potential electrical shocks or fires.<\/p>\n\n\n\n

Ground Wires<\/h3>\n\n\n\n

It also uses ground wires, a third insulated wire ( green or bare copper<\/strong>) instead of relying on the metal conduit that was commonly used with knob-and-tube wiring systems. This helps to reduce the potential for shocks and other electrical hazards in your home.<\/p>\n\n\n\n

What Are The Disadvantages Of Using Knob And Tube?<\/h2>\n\n\n\n

Some of the disadvantages associated with Knob and Tube Wiring can be shown as follows:<\/p>\n\n\n\n

1. It is quite old technology, so it might not be able to keep up with today\u2019s needs for quick and efficient electrical wiring<\/p>\n\n\n\n

2. Knob and Tube Wiring is difficult to work with as the wires are harder to access than newer technologies like Romex.<\/p>\n\n\n\n

3. Knob and Tube Wiring also requires a lot of labor to install properly and it is more expensive than other wiring options.<\/p>\n\n\n\n

4. Knob and Tube Wiring does not offer the same safety precautions that newer wiring technologies do. It lacks a Ground Fault Interrupt Circuit (GFCI), which detects dangerous electrical imbalances in outlets and immediately shuts off power to prevent injury or death from shock.<\/p>\n\n\n\n

5. Knob and Tube Wiring also has a higher potential for fire hazards due to the lack of insulation around the wires, which can cause them to overheat.<\/p>\n\n\n\n

6. Since it is not designed to handle multiple large appliances running simultaneously on one circuit, using more than one appliance in an outlet may overload the wiring and cause a short circuit.<\/p>\n\n\n\n

7. Knob and Tube Wiring are not able to support more modern technologies like flat-screen televisions or satellite dishes due to their higher power requirements. This lack of versatility makes it an outdated electrical wiring system for many newer homes.<\/p>\n\n\n\n

8. There is no doubt that the lines are overloaded. An average new home has 20 to 42 circuits. Nobody ever considered the amount of electrical stress you would be placed on the knob and tube when they were installed. The average home had four circuits back then.<\/p>\n\n\n\n

9. The old receptacle, lights, knob, and tube wiring boxes are too tiny. There will be a short circuit due to the breakdown of the wire insulation.<\/p>\n\n\n\n

10. The wiring is so weak that even the smallest modification, such as changing a lamp or receptacle, could result in a fire.<\/p>\n\n\n\n

11. Since the wiring is not color-coded, it is quite likely that the lights or receptacles are wired in reverse.<\/p>\n\n\n\n

12. The shock risk is substantially higher than with fresh wiring.<\/p>\n\n\n\n

13. This is an important one. Your homeowner’s insurance may no longer be covered by many insurance carriers.<\/p>\n\n\n\n

14. Since it significantly lowers the value of your home, many buyers will pass on homes with it.<\/p>\n\n\n\n

15. Since some electronics require a ground line to function properly, you can be overworking your devices.<\/p>\n\n\n\n

16. Your family’s security is in danger.<\/p>\n\n\n\n

How To Replace Knob And Tube Wiring With Romex?<\/h2>\n\n\n\n

Replacing knob and tube wiring<\/a> with Romex is a relatively straightforward task but requires careful attention to detail. It’s important to ensure that all electrical connections are made properly and according to local code. Here are the steps for replacing knob and tube wiring with Romex:<\/p>\n\n\n\n

1. Start by turning off the power at the circuit breaker. If you’re not sure which circuit breaker to turn off, turn them all off and then test each circuit with a voltage tester to make sure the power is off.<\/p>\n\n\n\n

2. Carefully remove the knob and tube wiring from the walls or ceiling by pulling on the insulation and gently prying out nails that may be holding it in place.<\/p>\n\n\n\n

3. Once the knob and tube wiring is removed, inspect it closely for any signs of damage or wear. If you find any, replace that section of wiring with a new Romex as needed.<\/p>\n\n\n\n

4. Install the new Romex by running it through the walls or ceiling <\/a>on a route that avoids any obstacles such as walls, doors, and cabinets. Secure the Romex in place using staples or tape every few feet along its route.<\/p>\n\n\n\n

5. Make all necessary electrical connections according to local codes and use wire nuts to join two or more wires together. Connect the hot wire (usually black) to the switch or outlet first, followed by the neutral (usually white) and then the ground (usually green).<\/p>\n\n\n\n

6. Test each circuit with a voltage tester to make sure all connections have been made properly and there are no shorts or other issues.<\/p>\n\n\n\n

7. Finally, turn the power back on at the circuit breaker and test your new wiring setup to make sure it’s working properly.<\/p>\n\n\n\n

Replacing knob and tube wiring with Romex is not a difficult task, but it’s important to take your time and make sure that all connections are secure and up-to-code. If you’re not comfortable doing the work yourself, hire an electrician to do the job for you. With proper care and caution, replacing knob and tube wiring with Romex can be done safely and effectively.<\/p>\n\n\n\n

Is It Expensive To Replace Knob And Wiring?<\/h3>\n\n\n\n
\"How
Knob And Tube Wiring <\/figcaption><\/figure>\n\n\n\n

The answer is yes. But it would be a great investment compared with keeping your house wiring system with knob and tube wiring.<\/strong><\/p>\n\n\n\n

The type of replacement could range from a few hundred dollars to several thousand, depending on the size and complexity of the job.<\/p>\n\n\n\n

You may need to hire an experienced electrician for this task.<\/p>\n\n\n\n

This would ensure that your home is safe and up-to-date with the current electrical codes.<\/p>\n\n\n\n

Even if you replace the knob and tube wiring yourself, you may still need to hire an electrician for inspection and approval.<\/p>\n\n\n\n

In any case, it is worth the money spent on replacing your knob and tube wiring to ensure safety in your home.<\/p>\n\n\n\n

It\u2019s important to make sure that your house is up-to-date with current electrical codes when replacing knob and tube wiring, due to the potential fire hazard that this type of wiring can pose.<\/p>\n\n\n\n

Replacing knob and tube wiring with Romex is an effective way to ensure your home’s safety, and it will also provide a modern look for your house. So, investing in the replacement is worth it.<\/p>\n\n\n\n

Conclusion<\/h2>\n\n\n\n

Replacing knob and tube wiring with Romex is a necessary task to ensure the safety of your home. <\/p>\n\n\n\n

This type of wiring may be outdated and pose a fire hazard, so it’s important to make sure that you replace it with the proper wiring system. <\/p>\n\n\n\n

The cost of replacing the knob and tube wiring can range from a few hundred dollars to several thousand, depending on the size and complexity of the job. <\/p>\n\n\n\n

However, it’s worth investing in this type of wiring replacement to ensure the safety of your home and its occupants. <\/p>\n\n\n\n

Be sure to hire an experienced electrician to do the job correctly, as well as have an inspection done afterward with a qualified inspector.<\/p>\n\n\n\n

FAQS<\/h2>\n\n\n\n

Q: What is knob and tube wiring?<\/h3>\n\n\n\n

A: Knob and tube wiring is a system of electrical wiring that was commonly used in homes from the late 1800s to the early 1900s. It uses ceramic knobs to hold wires in place and ceramic tubes to protect wires as they pass through walls and ceilings.<\/p>\n\n\n\n

Q: Why should I replace knob and tube wiring with Romex?<\/h3>\n\n\n\n

A: There are several reasons to replace knob and tube wiring with Romex. Knob and tube wiring is an outdated system that does not meet modern electrical safety standards. It is not designed to handle the electrical demands of modern appliances and electronics. Additionally, knob and tube wiring is more prone to damage from rodents, insulation, and other factors, increasing the risk of electrical fires.<\/p>\n\n\n\n

Q: How do I replace knob and tube wiring with Romex?<\/h3>\n\n\n\n

A: Replacing knob and tube wiring with Romex involves several steps. First, you need to turn off the power to the area where the wiring will be replaced. Then, you will need to remove the old knob and tube wiring, including the ceramic knobs and tubes. Next, install a junction box where each knob and tube connection used to be. Finally, run new Romex wiring from the breaker box to the junction boxes and connect the wiring properly.<\/p>\n\n\n\n

Q: Can I replace knob and tube wiring myself?<\/h3>\n\n\n\n

A: While it is possible for a homeowner to replace knob and tube wiring with Romex, it is generally recommended to hire a licensed electrician. Knob and tube wiring replacement can be complex and involve working with electrical systems. Hiring a professional ensures the work is done safely and meets electrical code requirements.<\/p>\n\n\n\n

Q: Can I install new light switches and fixtures with Romex when replacing knob and tube wiring?<\/h3>\n\n\n\n

A: Yes, when replacing knob and tube wiring with Romex, you can also update light switches and fixtures. This is a good opportunity to upgrade the electrical components in your home and improve functionality and safety.<\/p>\n\n\n\n

Q: Will replacing knob and tube wiring affect my home insurance?<\/h3>\n\n\n\n

A: It is possible that replacing knob and tube wiring with Romex may affect your home insurance. Some insurance companies may require the replacement of knob and tube wiring to provide coverage or offer a discount on premiums. It is best to check with your insurance provider for specific information regarding knob and tube wiring and home insurance.<\/p>\n\n\n\n

Q: Can I run Romex wiring inside existing walls?<\/h3>\n\n\n\n

A: Running Romex wiring inside existing walls can be challenging. You may need to open up walls and ceilings to access the areas where the wiring needs to be replaced. It is recommended to consult with a licensed electrician to determine the best approach and ensure the wiring is installed correctly.<\/p>\n\n\n\n

Q: How much does it cost to replace knob and tube wiring with Romex?<\/h3>\n\n\n\n

A: The cost to replace knob and tube wiring with Romex can vary depending on several factors, such as the size of your home, the complexity of the wiring, and the labor rates in your area. It is best to get a few quotes from licensed electricians to determine the cost for your specific situation.<\/p>\n\n\n\n

Q: Are there any permits required to replace knob and tube wiring?<\/h3>\n\n\n\n

A: In most cases, replacing knob and tube wiring with Romex will require a building permit. The specific requirements may depend on your local building codes and regulations. It is important to check with your local building department or municipality to determine if permits are needed and to ensure compliance with any applicable regulations.<\/p>\n\n\n\n

Q: How long does it take to replace knob and tube wiring with Romex?<\/h3>\n\n\n\n

A: The time it takes to replace knob and tube wiring with Romex can vary depending on the size and complexity of the project. A small, straightforward rewire may take a few days, while a larger project involving the entire house can take several weeks. It is recommended to consult with a licensed electrician for a more accurate estimate based on your specific situation.<\/p>\n\n\n\n

Best Wishes!!!<\/p>\n","protected":false},"excerpt":{"rendered":"

Knob and tube wiring was a common electrical system used in older homes before the 1950s. This type of wiring is no longer considered safe for use in most modern homes due to its age and lack of grounding protection. If your home still has knob and tube wiring, it’s important to replace it with … Read more<\/a><\/p>\n","protected":false},"author":2,"featured_media":1825,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_stopmodifiedupdate":false,"_modified_date":""},"categories":[42],"tags":[43,44,18],"yoast_head":"\nHow To Replace Knob And Tube Wiring With Romex? - Cohesive Homes<\/title>\n<meta name=\"description\" content=\"According to the NEC, knob and tube wiring must be replaced with Romex if the insulation is damaged or worn.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How To Replace Knob And Tube Wiring With Romex? - Cohesive Homes\" \/>\n<meta property=\"og:description\" content=\"According to the NEC, knob and tube wiring must be replaced with Romex if the insulation is damaged or worn.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex\" \/>\n<meta property=\"og:site_name\" content=\"Cohesive Homes\" \/>\n<meta property=\"article:published_time\" content=\"2023-01-30T10:58:41+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-10-09T14:26:28+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/cohesivehomes.com\/wp-content\/uploads\/2023\/01\/7.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"500\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Charlie D Paige\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Charlie D Paige\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"16 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex#article\",\"isPartOf\":{\"@id\":\"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex\"},\"author\":{\"name\":\"Charlie D Paige\",\"@id\":\"https:\/\/cohesivehomes.com\/#\/schema\/person\/1e2b7038c4923f2dbdbb99cd064c658c\"},\"headline\":\"How To Replace Knob And Tube Wiring With Romex?\",\"datePublished\":\"2023-01-30T10:58:41+00:00\",\"dateModified\":\"2023-10-09T14:26:28+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex\"},\"wordCount\":3238,\"publisher\":{\"@id\":\"https:\/\/cohesivehomes.com\/#organization\"},\"keywords\":[\"Electrics\",\"knob and tube\",\"romex\"],\"articleSection\":[\"Romex\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex\",\"url\":\"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex\",\"name\":\"How To Replace Knob And Tube Wiring With Romex? - Cohesive Homes\",\"isPartOf\":{\"@id\":\"https:\/\/cohesivehomes.com\/#website\"},\"datePublished\":\"2023-01-30T10:58:41+00:00\",\"dateModified\":\"2023-10-09T14:26:28+00:00\",\"description\":\"According to the NEC, knob and tube wiring must be replaced with Romex if the insulation is damaged or worn.\",\"breadcrumb\":{\"@id\":\"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cohesivehomes.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How To Replace Knob And Tube Wiring With Romex?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cohesivehomes.com\/#website\",\"url\":\"https:\/\/cohesivehomes.com\/\",\"name\":\"Cohesive Homes\",\"description\":\""Home is where the heart is"\",\"publisher\":{\"@id\":\"https:\/\/cohesivehomes.com\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cohesivehomes.com\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/cohesivehomes.com\/#organization\",\"name\":\"Cohesive Homes\",\"url\":\"https:\/\/cohesivehomes.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/cohesivehomes.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/cohesivehomes.com\/wp-content\/uploads\/2021\/10\/Cohesive-Homes-logo-Home-is-where-the-heart-is-text.png\",\"contentUrl\":\"https:\/\/cohesivehomes.com\/wp-content\/uploads\/2021\/10\/Cohesive-Homes-logo-Home-is-where-the-heart-is-text.png\",\"width\":350,\"height\":75,\"caption\":\"Cohesive Homes\"},\"image\":{\"@id\":\"https:\/\/cohesivehomes.com\/#\/schema\/logo\/image\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\/\/cohesivehomes.com\/#\/schema\/person\/1e2b7038c4923f2dbdbb99cd064c658c\",\"name\":\"Charlie D Paige\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/cohesivehomes.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/cohesivehomes.com\/wp-content\/uploads\/2022\/01\/Charlie-D-Paige-profile-pic-96x96.jpg\",\"contentUrl\":\"https:\/\/cohesivehomes.com\/wp-content\/uploads\/2022\/01\/Charlie-D-Paige-profile-pic-96x96.jpg\",\"caption\":\"Charlie D Paige\"},\"description\":\"Charlie is a massive DIY fan, with dozens of DIY projects under his belt - ranging from tiling to electrics, and concrete pads to walls. Charlie loves tinkering, seeing how things works, the outdoors and playing with power tools... so is it any wonder that he's completed so many DIY jobs over the years? Charlie loves spreading his hard-won DIY experience with the world via this blog.\",\"sameAs\":[\"https:\/\/cohesivehomes.com\"],\"url\":\"https:\/\/cohesivehomes.com\/author\/cdp\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How To Replace Knob And Tube Wiring With Romex? - Cohesive Homes","description":"According to the NEC, knob and tube wiring must be replaced with Romex if the insulation is damaged or worn.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex","og_locale":"en_US","og_type":"article","og_title":"How To Replace Knob And Tube Wiring With Romex? - Cohesive Homes","og_description":"According to the NEC, knob and tube wiring must be replaced with Romex if the insulation is damaged or worn.","og_url":"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex","og_site_name":"Cohesive Homes","article_published_time":"2023-01-30T10:58:41+00:00","article_modified_time":"2023-10-09T14:26:28+00:00","og_image":[{"width":800,"height":500,"url":"https:\/\/cohesivehomes.com\/wp-content\/uploads\/2023\/01\/7.jpg","type":"image\/jpeg"}],"author":"Charlie D Paige","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Charlie D Paige","Est. reading time":"16 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex#article","isPartOf":{"@id":"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex"},"author":{"name":"Charlie D Paige","@id":"https:\/\/cohesivehomes.com\/#\/schema\/person\/1e2b7038c4923f2dbdbb99cd064c658c"},"headline":"How To Replace Knob And Tube Wiring With Romex?","datePublished":"2023-01-30T10:58:41+00:00","dateModified":"2023-10-09T14:26:28+00:00","mainEntityOfPage":{"@id":"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex"},"wordCount":3238,"publisher":{"@id":"https:\/\/cohesivehomes.com\/#organization"},"keywords":["Electrics","knob and tube","romex"],"articleSection":["Romex"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex","url":"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex","name":"How To Replace Knob And Tube Wiring With Romex? - Cohesive Homes","isPartOf":{"@id":"https:\/\/cohesivehomes.com\/#website"},"datePublished":"2023-01-30T10:58:41+00:00","dateModified":"2023-10-09T14:26:28+00:00","description":"According to the NEC, knob and tube wiring must be replaced with Romex if the insulation is damaged or worn.","breadcrumb":{"@id":"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cohesivehomes.com\/how-to-replace-knob-and-tube-wiring-with-romex#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cohesivehomes.com\/"},{"@type":"ListItem","position":2,"name":"How To Replace Knob And Tube Wiring With Romex?"}]},{"@type":"WebSite","@id":"https:\/\/cohesivehomes.com\/#website","url":"https:\/\/cohesivehomes.com\/","name":"Cohesive Homes","description":""Home is where the heart is"","publisher":{"@id":"https:\/\/cohesivehomes.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cohesivehomes.com\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/cohesivehomes.com\/#organization","name":"Cohesive Homes","url":"https:\/\/cohesivehomes.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/cohesivehomes.com\/#\/schema\/logo\/image\/","url":"https:\/\/cohesivehomes.com\/wp-content\/uploads\/2021\/10\/Cohesive-Homes-logo-Home-is-where-the-heart-is-text.png","contentUrl":"https:\/\/cohesivehomes.com\/wp-content\/uploads\/2021\/10\/Cohesive-Homes-logo-Home-is-where-the-heart-is-text.png","width":350,"height":75,"caption":"Cohesive Homes"},"image":{"@id":"https:\/\/cohesivehomes.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/cohesivehomes.com\/#\/schema\/person\/1e2b7038c4923f2dbdbb99cd064c658c","name":"Charlie D Paige","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/cohesivehomes.com\/#\/schema\/person\/image\/","url":"https:\/\/cohesivehomes.com\/wp-content\/uploads\/2022\/01\/Charlie-D-Paige-profile-pic-96x96.jpg","contentUrl":"https:\/\/cohesivehomes.com\/wp-content\/uploads\/2022\/01\/Charlie-D-Paige-profile-pic-96x96.jpg","caption":"Charlie D Paige"},"description":"Charlie is a massive DIY fan, with dozens of DIY projects under his belt - ranging from tiling to electrics, and concrete pads to walls. Charlie loves tinkering, seeing how things works, the outdoors and playing with power tools... so is it any wonder that he's completed so many DIY jobs over the years? Charlie loves spreading his hard-won DIY experience with the world via this blog.","sameAs":["https:\/\/cohesivehomes.com"],"url":"https:\/\/cohesivehomes.com\/author\/cdp"}]}},"_links":{"self":[{"href":"https:\/\/cohesivehomes.com\/wp-json\/wp\/v2\/posts\/1822"}],"collection":[{"href":"https:\/\/cohesivehomes.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cohesivehomes.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cohesivehomes.com\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/cohesivehomes.com\/wp-json\/wp\/v2\/comments?post=1822"}],"version-history":[{"count":5,"href":"https:\/\/cohesivehomes.com\/wp-json\/wp\/v2\/posts\/1822\/revisions"}],"predecessor-version":[{"id":3894,"href":"https:\/\/cohesivehomes.com\/wp-json\/wp\/v2\/posts\/1822\/revisions\/3894"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/cohesivehomes.com\/wp-json\/wp\/v2\/media\/1825"}],"wp:attachment":[{"href":"https:\/\/cohesivehomes.com\/wp-json\/wp\/v2\/media?parent=1822"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cohesivehomes.com\/wp-json\/wp\/v2\/categories?post=1822"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cohesivehomes.com\/wp-json\/wp\/v2\/tags?post=1822"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}